FS728TS, FS752TS, FS752TPS Firmware Version 1.0.1.23

Published October 3, 2007

Modifications/Fixes:

1. Fixed the problem that external electrical noise may trigger the FS700TS to reset its configuration back to factory default values.

Upgrading

Important Note: If the boot code version of your switch is 1.0.0.7 or earlier, please upgrade the boot code to 1.0.0.8 or later after you have upgraded the firmware. Boot code 1.0.0.8 and upgrade instruction can be found in firmware download image Version 1.0.1_22

1. Download the link below to a PC , and unzip it to a convenient folder. This is a large file!

   2.42 MB

2. Start Smartwizard Discovery Utility, (included on the CD coming with your Smart Switch). If it is not installed, do so now, before continuing.
3. In Smartwizard Discovery window, click Discover to find your Smart Switch. The switch will be listed in the device list table once found. (Note: Smartwizard Discovery uses broadcast packets to find Smart Switches, which means it can only find Smart Switches in the same routing domain.)
4. Highlight the Smart Switch to upgrade and click Firmware Upgrade.
5. Follow the screen prompts to complete the upgrade. Smartwizard Discovery will report a successful completion at the end.

d103191.asp