WGR614v7 Firmware Version 2.0.20_1.0.20NA
North America & World Wide Versions

Published April 25, 2007.

New Features

1. Upgrade to Cone NAT.
2. Added WMM & power-save mode.

Bugs Fixed

1. Multiple PPLive clients on LAN will cause router reboot.
2. MSN "lan to lan" white board and application sharing bug fixing.
3. X-Lite phone will cause router reboot.
4. Incorrect port mapping issue for SIP phone.
   

Upgrading

1. Download the file to a convenient place such as your desktop.

   For North America users only

   935 KB

   World wide version (except North America)

   935 KB

   Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

2. Open a Web browser.
3. Access the router (http://192.168.1.1 or the Default Gateway address if the router's default IP was changed).
4. Log in the router (User Name = admin and Password = password, unless you changed it).
5. Write down all settings that you entered when previously configuring. (Usually this includes information such as ISP configuration and wireless security settings.)
6. Under Maintenance, click Router Upgrade.
7. Click Browse and locate the firmware upgrade file.
8. Click Upload.
9. Wait for the router to reboot.
10. Under Maintenance, click Settings Backup, then click Erase. (Or press the reset button on the back for 10 seconds.)
11. Wait one minute for the router to reboot.
12. Manually enter the configuration information you wrote down in Step 4.

d103088..asp