FWG114Pv2 ProSafe VPN Firewall
Firmware Version 1.2_07

North American Version Published Dec. 10, 2006
World Wide Version Published Jan 29, 2007

NOTE: There are two versions of the FWG114P. This software is only for the FWG114Pv2. If the bottom label on your router says FWG114P, not FWG114Pv2, this software can not be loaded into your router.

Modifications and Fixes

1. Updated the daylight saving behavior to the proposed change effective beginning 2007.

To Upgrade

Warning: Any configuration setting will be reset to factory default value after upgrading to V1.2_01 from older releases. It will also reject configuration files obtained from older releases.

1. Download the upgrade file using the button which is appropriate for your location. Save to a convenient place such as your desktop.

Download for North America only

1.76 MB

Download for Outside North America only

1.76 MB

2. Using a browser, login to the router as admin.
3. Under Maintenance, click Router Upgrade.
4. Click Browse and locate the upgrade file you just downloaded.
5. Click Upload.
6. Wait for the router to reboot and the TEST LED to turn off.
7. Turn the router power off.
8. Turn the router power back on.

NOTE: For problems after upgrade, clear the old configuration by pressing the Factory Defaults pushbutton on the rear panel until the Test LED blinks (about 10 seconds). Then reenter your configuration information manually. Before upgrading from an earlier version, write down all of your configuration information.

D103024.asp