WGT624v3 or WGT624SC Firmware Version 2.0.16_1.0.1 (N.A. & W.W.)

• Do not use on WGT624 or WGT624v2

Published September 22, 2006

Bug Fixes

1. This version resolves LAN/WAN address conflict.
2. Fixed a bug which limited the maximum number of forwarded ports to 10.
3. Wireless connectivity works properly in WPA-PSK mode.
4. Fixed the bug which caused "Could not connect to the internet" error message when clicking the next button multiple times within short time interval on the Network summary page.
5. Added authentication support for email server.

To Upgrade

Upgrades should be done using a wired Ethernet connection, if possible.

1. Before you upgrade write down all the settings you changed from default values, as you need to enter them MANUALLY after upgrading. Typically, people change: SSID, channel, password, and security (WEP, WPA).
2. Download to a convenient place such as your desktop.

   for customers in North America:

1.05 MB

for customers outside North America (World Wide release):

1.05 MB

1. Open the browser and access the router (usually the address is http://192.168.1.1).
2. Log in to the router (User Name = admin and Password = password unless you have changed it).
3. Click Maintenance > Router Upgrade
4. Click Browse and locate the upgrade file (download link is below).
5. Click Upload
6. Wait for the router to reboot.
7. Verify that the router firmware by checking the firmware version under Maintenance > Router Status
8. Reset router to factory defaults by clicking Maintenance > Backup Settings > Erase
9. Wait for the router to reboot.
10. Log in to the router.
11. Enter the routers settings you noted down before upgrading. We recommend running the Setup Wizard to automatically detect your broadband configuration.

D102982.asp