WGR614v6 Firmware Version 2.0.13_1.0.13NA

This firmware is for North American users only.

Published Sep. 13, 2006

New Features

1. Added Intel Viiv support.

Fixes

1. Fixed the bug which caused the router to reboot when PPTP server disconnects the session.

To Upgrade

Be sure to follow Steps 4 and 12, as described. It may seem they can be avoided, however this may cause performance or other problems later.

1. Open a Web browser.
2. Access the router (http://192.168.1.1 or the Default Gateway address if the router's default IP was changed).
3. Log in the router (User Name = admin and Password = password, unless you changed it).
4. Write down all settings that you entered when previously configuring. (Usually this includes information such as ISP configuration and wireless security settings.)
5. Download the file
6. Under Maintenance, click Router Upgrade.

   

7. Click Browse and locate the firmware upgrade file.
8. Click Upload.
9. Wait for the router to reboot.
10. Under Maintenance, click Settings Backup, then click Erase. (Or press the reset button on the back for 10 seconds.)
11. Wait one minute for the router to reboot.
12. Manually enter the configuration information you wrote down in Step 4. Use the Smartwizard, or manually configure as shown in the box below.

If the router has problems, repeat the whole procedure, Steps 1-12.

Download, only for North American routers with version ending "v6".

798 KB
Note: Do not upgrade the firmware using a wireless connection. Please perform firmware upgrade with “wired” or Ethernet connection only.

d102975.asp