DG834N RangeMax NEXT ADSL2+ Modem Router
Firmware 1.01.02

Published June 22, 2006

Fixes

1. This firmware now supports four languages: English, German, Italian and French.
2. The wireless driver has improved performance.
3. Fixed a problem when using PPPoE with Idle Timeout, where the PPP link LED (depicted as chain links, just below the Power LED) stayed on even after Idle timeout was reached.
4. Fixed a problem with WLAN Up Time on the Router Status, Show Statistics page which showed zero up time even when the WLAN was up and running.

To Upgrade

1. If you've changed any values from the defaults, write them down. Then if you ever need to do a factory reset, if there are problems upgrading, you'll have all the information easily available.
2. Download using the button below, saving to a convenient place such as your desktop.

   3.13 MB

3. Using a Web browser, login to the router as admin
4. Under Maintenance click Router Upgrade
5. Click Browse and find the upgrade file dg834n_1_01_02.img
6. Click Upload
7. Wait for the upgrade progress bar to complete and final prompt to appear.

For problems after upgrading, try clearing the configuration by pressing the Factory Defaults pushbutton on the rear panel until the Test LED blinks (about 10 seconds). Then reenter your configuration information manually.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.

D102906.asp