- Most users should not upgrade! Most users already have what they need, and should not download from this page!
- Exception: The older ME102 with firmware 1.3x can be upgraded to 1.4h3
This adds:
- 128-bit WEP Encryption
- Wireless bridge functions: Point-to-Point and Point-to-MultiPoint
- Access Point Client
- MAC Address Control
Do not change firmware for the older ME102 using 1.4h4. (It's virtually the same as 1.4h3.)
The newest ME102 using 2.0.1.16 should not be changed. The newer ME102 is distinguished by the bottom label, which includes "Rev.B" in the model number, as highlighted
ME102 Rev.B Label Detail
The beta firmware should not be used at all, except in the special case of some Windows 2000 users.
| Version | Latest Firmware Version | Latest Software Version |
| ME102 (Usually with a serial number starting "ME12A".) | 1.4h3 Instructions: me102_v14h3_proc.zip Firmware: me12v14h3.zip 3.36 MB |
CD1.x or CD 2.x me12cd11.zip 2.68 MB |
| ME102 (Usually with a serial number starting "ME12B".) | 1.4h4 |
CD1.x or CD 2.x |
| ME102 Rev.B (Serial number usually starting with "ME12C".) |
2.0.1.16 NO LINK. DO NOT USE ABOVE LINKS! |
CD2.x me102_cd_v2.zip 2.54 MB |
Software CD 2.0 is applicable to the old and new hardware versions provided the old driver/software is uninstalled and replaced with the new driver/software. The software utilities shipping on CD 2.x can be used with either the old or new type ME102. (The firmware for ME102 Rev.B is not available.)
Besides the above recommended latest firmware, beta software was released that fixes NO critical problems, and is only useful to customers running Windows 2000 and the USB version of the software utilities. Nobody else should consider using this version.