WGT624v3 Firmware Version 1.0.120

Enhancements since 1.0.18

Adds support for Trend Micro Network security services and parental controls.

Changes since 1.0.12

The "108 Only" mode and associated Adaptive Radio option were removed to conform to Wi-Fi certification requirements. If that mode was selected, after this upgrade "Auto 108" mode is automatically selected.

Installation Instructions

1. Before you upgrade write down all current settings as you need to enter them MANUALLY after upgrading.

   1.23 MB

2. Open the browser and access the router (usually the address is http://192.168.1.1).
3. Log in to the router (User Name = admin and Password = password unless you have changed it).
4. Click Maintenance > Router Upgrade.
5. Click Browse and locate the upgrade file (download link is below).
6. Click Upload.
7. Wait for the router to reboot.
8. Verify that the router firmware was upgraded.
9. Reset router to factory defaults.
10. Wait for the router to reboot.
11. Reenter the settings you noted down before upgrading.

Published: July 25, 2005

D102732.asp