GSM7224 Software Version 3.0.3.2

Published March 1, 2005

Issues This Firmware Resolves

1. The option to configure VLAN priority was added to the user interface.

Installation Procedure

The firmware upgrade requires a TFTP server. If you do not have such utility, go to this site to download the free software: http://support.solarwinds.net/updates/New-customerFree.cfm. Follow the instructions to install it on your server.

1. Download the link below to a PC with TFTP server, placing it in the TFTP home/root directory
2. Go to System > System Utilities > Download file to switch page in the Web interface
3. Select Code for ‘File Type’
4. Verify information such as the IP address for the TFTP Server, the Gateway IP address, and the filename and its path of the new image (no path is needed if the file is under TFTP root directory)
5. Check Start File Transfer, and then click Submit
6. A message shows on the shaded line, indicating start of file transfer. During transfer, the Web GUI flashes once a second to indicate progress After the file downloads another message shows, indicating the image is storing to FLASH. This takes a few minutes. DO NOT RESET OR POWER CYCLE THE MACHINE DURING THIS PERIOD. After the writing to the FLASH is complete, another message shows indicating the operation completed successfully. You can now safely restart the switch
7. Restart. Go to System > System Utilities > System Reset. Click Reset. It asks if you want to save changes. Answer Yes, and the system reboots
8. After system comes back up, go to System > Inventory Information to confirm the software version is correct

4 MB

D102624.asp