MR814v1 Firmware Version 4.14 Release Candidate 4

Published Feb. 24, 2004

Make sure you have the right MR814 before using this firmware.

The MR814 is distinguished from the MR814v2 and MR814v3 by the bottom label. The MR814 label reads simply "MR814", as shown.

MR814 Label vs. MR814v2 Label

Modifications

1. NTP improvements
2. Fixed issues with BellSouth ISP
3. Fixed issues with various Chinese ISPs and PPPoE

Installation

Before upgrading, write down all your router settings, as you will reenter them MANUALLY after upgrading.

1. Open a browser.
2. Access the router by typing its IP address (usually http://192.168.0.1).
3. Login to the router (Default username = admin, password = password).
4. Click Maintenance > Router Upgrade.
5. Click Browse and locate the upgrade file.
6. Click Upload.
7. Wait for the router to reboot.
8. Verify that the router firmware has been upgraded.
9. Reset router to factory defaults.
10. Wait for the router to reboot.
11. Re-enter the settings you wrote down before upgrading.

759 KB

D102401.asp