WGT624 and WGT624v2 Firmware Version 4.1.11

Published June 24, 2004

• The German NETGEAR Web site has a German language version.

  A Japanese version is available on the Japanese Web site. You may use this version, but it is illegal in Japan to turn on the channel bonding feature.

Fixes since version 4.1.8

1. Fixed Check Point VPN Connection Drop issue (when using UDP encapsulation).
2. Fixed Vonage VoIP call connection drop issue.

Upgrading to the New Software

You can upgrade by using the web interface Router Upgrade menu

1. Before you upgrade write down all of your current settings as you will need to enter them in MANUALLY after upgrading your firmware
2. Open the browser and access the router (usually the address is http://192.168.0.1).
3. Log in to the router (User Name = admin Password = password unless you have changed it).
4. Click Maintenance > Router Upgrade
5. Click Browse and locate the upgrade file (download link is below).
6. Click Upload
7. Wait for the router to reboot.
8. Verify that the router firmware has been upgraded.
9. Reset router to factory defaults.
10. Wait for the router to reboot.
11. Reenter the settings you noted down before upgrading.

1.11 MB

D102372.asp