MR814 Firmware Version 4.13

Published August 20, 2003

The MR814 is distinguished from the MR814v2 by the bottom label. The MR814 label reads simply "MR814", as shown.

MR814 Label vs. MR814v2 Label

Make sure you have the right MR814 before using this firmware.

Modifications

1. NTP improvements

To Upgrade to the New Firmware

Before upgrading, write down all your router settings, as you will re-enter them MANUALLY after upgrading.

1. Open a browser.
2. Access the router by typing its IP address (usually http://192.168.0.1).
3. Login to the router (Default username = admin, password = password).
4. Click Maintenance > Router Upgrade.
5. Click Browse and locate the upgrade file.
6. Click Upload.
7. Wait for the router to reboot.
8. Verify that the router firmware has been upgraded.
9. Reset router to factory defaults.
10. Wait for the router to reboot.
11. Re-enter the settings you wrote down before upgrading.

758 KB

D102085.asp