DG834PN Super Wireless ADSL Router Firmware Version 1.03.36

Published Jan 28, 2008

• Not for use in North America!
• Not for use in Germany!

Bug Fixes:

1. Fixed a problem where the screen saying "Web Site Blocked by NETGEAR Firewall" did not appear when a site was blocked.
2. Enabled ITU G.992.5 Annex M which extends the capability of basic ADSL2 by doubling the number of upstream bits.

To Upgrade

1. To reach the Upgrade menu, click Router Upgrade from the Maintenance section.
2. Download using the button below, saving to a convenient place such as your desktop.

   3.76 MB

3. Using a browser, log in to the router as admin
4. Under Maintenance, click Router Upgrade
5. Click Browse and locate the upgrade file dg834pn_1_03_36.img
6. Click Upload
7. Wait for the upgrade progress bar to complete and final prompt to appear.

For problems after upgrading, write all the configuration information that you changed from the defaults. Clear the configuration by pressing the Factory Defaults pushbutton on the rear panel until the Test LED blinks (at least 10 seconds). Then reenter your configuration information manually.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.

D103244.asp