Downloads   Registration   Customer Service    Service Offerings    Discussion Forums    Support Home    NETGEAR Home    


For the latest troubleshooting, see the FVS338 Support Page. Recent changes include:

Forgotten or Lost Router Password

Troubleshooting Wireless Products

Improving Wireless Range

FVS338 ProSafe™ VPN Firewall 50 Release Notes

This note describes enhancements and bug fixes in the FVS338 Release Version 1.6.40 software. The enhancements and fixes are those added since Release Version 1.6.5.

New Features Overview

   Version 1.6.40

Trend Micro Antivirus Enforcement
When your LAN is protected by Trend Micro™ Client/Server/Messaging Suite for SMB, you can configure the firewall to block Web access by LAN PCs that do not have the Trend Micro client installed, or do not have the most recent updates. There is a Trend Micro menu under the Advanced section of the configuration manager.

To use this feature, if a trial verision Trend Micro CD was not included with your router, go to this URL and download the client software: http://www.trendmicro.com/download/trial/trial-us.asp?id=39.

For help with this feature, contact Trend Micro directly at http://kb.trendmicro.com/solutions/search/default.asp.

    Version 1.6.35

XAUTH (Extended Authentication) and RADIUS Support for VPN
XAUTH is configured in IKE Policy menu, RADIUS in the new Radius Client menu. Users and passwords can also be added in the new User Database menu.

NetBIOS Broadcast Support over VPN
Configured in VPN Policy menu.

    Version 1.6.29

IKE Mode Config
Mode Config allows a remote VPN client to obtain a virtual IP address and other IP configuration information (DNS, WINS, etc) from the router.

Modifications and Bug Fixes

    Version 1.6.40

See Known Issues

  1. Restore backup file problems.
  2. Compatibility with TA612V.
  3. Email - authenticate with SMTP server radio button is now on by default.
  4. NTP server: can now switch back to Default NTP Server.
  5. ARP scan fixes.
  6. DDNS update in failover fixed.
  7. User Database page has been modified. Users should be configured into groups A default group: "defaultgrp" is provided.
  8. Keyword blocking issue fixed.
  9. Manual VPN GUI fixed.
  10. WAN Mode menu modifications.
  11. Secondary DNS server is included in PPPoE and PPTP mode.
  12. SIP ALG bug fixes from FVX538 are integrated.
  13. Domain Name can be configured in DHCP.
  14. Groups and Hosts menu fixes.
  15. Miscellaneous bug fixes.

    Version 1.6.35

  1. Fixed: IKE in fail-over was not updating the MyAddr field when local IP Address was configured with FQDN.
  2. Fixed disconnecting Dialup after rollover.
  3. Fixed load balancing and failover issues.
  4. Added support for US Robotics modem.
  5. Added failover detection using PING instead of DNS.
  6. Fixed NNTP (newsgroups) bug.
  7. Fixed Cisco VPN interoperability issue.
  8. Fixed DynDNS issue.
  9. Fixed DHCP issues.
  10. Fixed inbound rules disappearing.
  11. Fixed PPPoE LCP issue.
  12. Fixed MTU reset to 1500 after reboot.
  13. Fixed Microsoft Root Certificate loading.
  14. Can add more than 129 inbound rules.

    Version 1.6.29

  1. Update mode config help menu.
  2. Fixed conflicts between mode config and regular client configurations.
  3. Fixed DynDNS issues.
  4. Fixed failover problem from Dialup to BroadBand ISP.

    Version 1.6.26

  1. PPPoE stability problems are fixed.
  2. Can now add custom services up to 125 total services.
  3. Increased the total number of possible rules to 600.
  4. SMTP login name can now accept up to 50 characters.
  5. Problem in disabling inbound rules is fixed.
  6. VPN interoperability improvements.

    Version 1.6.23

  1. FQDN support with Main mode added to VPN Wizard.
  2. Disable VPN policy will drop tunnel now.
  3. Manual switch over to broadband will access Internet now.
  4. DynDNS status fixed.
  5. VPN remote can now be configured to Any.
  6. PPPoE MTU value is now set to 1492 by default.
  7. Fixed dropped packets in VPN tunnel.

    Version 1.6.17

  1. Added support for modem hardware flow control signals.
  2. Added image upgrade header validation so router will not upload the wrong image.
  3. Modified AES key length selection menu.
  4. Guest (read-only) default login password changed to password.

    Version 1.6.15

  1. VPN throughput increased.
  2. Number of simultaneous sessions increased.
  3. Guest (read-only) password can now be changed separately (default is guest).
  4. Fixed crash from SNMP daemon.
  5. Fixed GUI hang when accessing Statistics window.
  6. Fixed unrequested blocking of websites.
  7. Fixed operation of factory default button.
  8. Default gateway is now shown in routing table.
  9. Fixed issue when changing from static to PPPoE WAN.
  10. Fixed: VPN traffic stops when heavy traffic.
  11. Removed One-to-one NAT table and Exposed Host, since these functions can be performed with Inbound Rule.

Known Issues

  • Notes on VPN client policy changes in v1.6.40
    1. Users are not added to the User Database automatically.
    2. You must add VPN client users in the User Database menu whether or not XAUTH is to be used. In addition, each user entry must be assigned to a group named after the VPN policy. For example:
      If the VPN client "boston15.fvs_remote.com" will be connecting, using the VPN policy "boston", then a User Database entry must be created for:
      • User Name: boston15
      • Password: (will be ignored unless XAUTH is enabled)
      • Group: boston
    3. ModeConfig and XAUTH users must be assigned to DefaultGroup.
  • Due to these User Database menu modifications, we recommend starting from factory defaults. Alternatively, you may try the following steps after upgrading to avoid factory defaults configuration:
    1. Delete all Client VPN policies.
    2. Reboot the router.
    3. Configure Client VPN policies.
  • You may need to toggle Daylight Savings Time setting after upgrade.
  • If you were having problems with reserved IP addresses in Groups and Hosts, you may need to perform a factory default reset after upgrading to the newer version.

To Upgrade

  1. Download using the button below to a convenient place such as your desktop. This is a large file!

    6.93 MB

  2. Using a browser, login to the router as admin.
  3. Under Management, click Router Upgrade.
  4. Click Browse and locate the upgrade file fvs338_v1.6.40.img.
  5. Click Upload.
  6. Wait for the router to reboot and the TEST LED to turn off.
  7. Turn off the power to the router.
  8. Turn on the power to the router.

If the upgrade causes problems, record your configuration information, clear the configuration, either by using the Factory Defaults pushbutton on the front panel or the Erase button in the Backup Settings menu. Then reenter your configuration information manually.

April 20, 2005

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.

D102750.asp

  
   


Support Knowledgebase
Manuals
Sales and Company Information

                © 1998-2006 NETGEAR | Contact Us | Configure Your Network | Home