FM114P ProSafe Firewall Version 1.5 Release 09

Published date: May 20, 2004.

This note describes enhancements and bug fixes incorporated in the release software version 1.5 Release 09. The enhancements and fixes are those added since software release version 1.4 Release 26.

NOTE: If upgrading from a version older than v1.3, you must first upgrade to v1.3, then to v1.5.

NOTE: You MUST clear the configuration after upgrading (either by using the default button on the rear panel or the Erase button in the Backup Settings menu) and reenter your configuration information manually.

New Features Overview

• Support for Mail Servers Requiring Authentication
• Support for Additional Dynamic DNS Providers
  [ TZO.com and Oray (China) services added ]
• Support for PPPoE with static IP address

Modifications and Bug Fixes

Release version 1.5r09

1. Added DHCP server address, DHCP lease time, DNS server address on the WAN status page when WAN connection is DHCP.
2. Fixed slow GUI response when UPnP enabled.
3. Fixed issue when LAN interface and modem have same IP address.

Release version 1.5r08

1. Outbound rule now supports wan ip ending in 255.
2. Added UPnP in LAN IP Help page.
3. Email page: if uncheck My Mail Server requires authentication.
4. Improved UPnP on DMZ port (DirectX 5 issue).
5. Fixed CUSeeMe firewall issue.
6. Support for PPPoE with static IP.
7. Change TCP flood check number to 50 (was 30).
8. Fixed: When adding predefined IRC rule, sometimes said "Same port cannot be mapped twice".

Beta version 1.5r07

1. Fixed bugs in ngDDNS (Oray DDNS service).
2. When adding an inbound rule with Block Always, LAN Server IP is now disabled.
3. Supports DHCP Force Renew.
4. Improved: Block TCP Flood.
5. Associate DHCP table with PC database.
6. Changing Idle Timeout no longer requires re-login .
7. Add default route in routing table .
8. Diagnostic menu now works with Safari browser.
9. Fixed: Keyword block log format contained duplicated timestamp.
10. Fixed: Rules can't be restored from backup config file (Old config files can't be used in this version).
11. Fixed: FTP passive mode didn't work well with short scripts.
12. Fixed: Large attachment issues with PPTP service in Austria.
13. Fixed: Browsing during heavy TCP SYN packets.
14. Supports 32 MAC addresses in wireless access control list (was 20).
15. Diagnostics menu can now ping an IP address ending with 255.
16. Fixed: Restoring config did not accurately reload the services table.
17. Sends NTP request when WAN IP changes.
18. Fixed: When TCP server and TCP client close the session simultaneously, "ack" the fin packet correctly.

Beta version 1506

1. Fixed: DNS cache caused LAN PC to get old IP for updated domain name.
2. Fixed: when "log always" selected, device only record the first policy's matching result.
3. Fixed: device getting time log will display duplicated week-day.
4. Fixed: when "NONE" selected on log email send page, log still sent when log is full.
5. Fixed: device records all packets even if "all incoming/outgoing" are not selected.
6. Fixed: MSN file transfer fail between v5 & v6.
7. Fixed: User defined MTU cannot be saved.
8. Fixed: change password will get a "login fail, password error" log.
9. Add check that user defined service name should not contain "()&" characters.
10. Improve upgrade code.
11. Fixed: if refresh a website several times, device will think it is an attack and will block this PC.
12. Fixed: NULL URL will cause device hangup.
13. Fixed: if ping packet length longer than 1199 will get "request time out".

Known Issues

• If Print Server does not function after upgrade:
  
  1. Go to LANIP menu
     
  2. Disable Print Server
     
  3. Click Apply
     
  4. Enable Print Server
     
  5. Click Apply
     
  
  
• Logging is very verbose by default. As this may affect performance, you may want to turn off logging of items that are not of interest to you.
  
  
• If wireless connections fail after upgrade:
  
  1. Go to Wireless menu
     
  2. Click Apply

Upgrade Instructions

NOTE: You MUST clear the configuration after upgrading (either by using the default button on the rear panel or the Erase button in the Backup Settings menu) and re-enter your configuration information manually. Please write down all of your configuration information before upgrading.

1. Download using the button below to a convenient place such as your desktop and extract the file.

750KB

1. Using a browser, login to the router (the default URL is http://192.168.0.1). The user name is admin, and the default password is password.
2. Under Maintenance, click Router Upgrade
3. Click Browse and locate the file which you just downloaded: fm114p_1509.img
4. Click Upload.
5. Wait for the upgrade progress bar to complete and final prompt to appear.

If problems occur after upgrading, power cycle the router, then press the rear panel pushbutton for at least 10 seconds. Allow the router to reboot, then reconfigure.

D102346.asp