This describes ANT24D18 versions, and includes links to downloads. Versions are identified by reading the box or the bottom label.

• The two versions of this antenna have a similar network role, but are not the same product.
• FCC and EU compatibility testing and certification with other NETGEAR products only applies to ONE model, not both.
• It is not possible to order one particular version on the Web. The earlier product is EOL and may be difficult to find new.
• No upgrade between hardware versions is available.
• Marketing sites such as www.netgear.com only refer to latest version.

ANT24D18v2

This version reads "ANT24D18v2" on the bottom label.

• Beam width 33° horizontal 30° vertical
• SWR less than or equal to 1.92 maximum
• Return loss -10 dB
• Gain 14 dBi
• Operating temperature -20°C to +65°C (-4°F to 149°F)
• Maximum Input Power 20 W (with 45 cm cable and Rev. N-Type connector)
• Flat case with a raised low lemon drop shape

ANT24D18v2 Support Page, with downloads

ANT24D18 (aka ANT24D18v1)

This version is EOL, and reads "ANT24D18v1" on the bottom label.

• Beam width 60° horizontal 30° vertical
• SWR less than or equal to 1.5 maximum
• Return loss -15 dB
• Gain 18 dBi
• Operating temperature -30°C to +80°C (-22°F to 176°F)
• Maximum Input Power 20 W (without N/SMA adapter)
• Case like the back of spade

ANT24D18v1 Support Page, with downloads