Interpreting SC101T Light Status

Interpreting SC101T Light Status

This describes all the SC101T light states.
If you are looking for information on SC101 Light Status, visit this article.

Light	Light State	What It Means	What You Should Do
Blue Disk Light	Off	1) SC101T has no power 2) SC101T is not turned on 3) There is no disk activity	1) Check plug has power 2) Plug in the SC101T 3) Normal state, do nothing
	On	4) There is disk activity	4) Normal state, do nothing
Green Power Status Light	Off	1) SC101T has no power 2) SC101T is not turned on 3) Self-test is not finished	1) Check plug has power 2) Plug in the SC101T 3) Normal state, do nothing
	On	4) SC101T is working normally	4) Normal state, do nothing
	Fast constant blinking	5) No working hard drives are inserted	5) Power off the SC101T, insert working hard drive
	1 blink at intervals (rare)	6) Error on disk 1 encountered	6) If operation continues normally, do nothing. However disk errors may lead to some unreadable files. Make sure this disk is backed up, or replace the disk.
	2 blinks at intervals (rare)	7) Error on disk 2 encountered	7) If operation continues normally, do nothing. However disk errors may lead to some unreadable files. Make sure this disk is backed up, or replace the disk.
	3 blinks at intervals	8) DHCP network addressing problem	8) Consult the User Manual on DHCP
	4 blinks at intervals	9) An older, incompatible disk is inserted	9) Power off the SC101T, replace disk with ATA6 IDE disk or newer
Yellow Ethernet Status Light	Off	1) SC101T has no power	1) Check plug has power
	On	2) No data is being transferred over network	2) Normal state, do nothing
	Blinking	3) Data is being transfered over network	3) Normal state, do nothing

N101665.asp Apr. 4, 2007